Hello! It’s Suzanne, Rebecca’s Momma, back on the blog today with my first Sunday edition. Today’s post is a special request from Rebecca, who was chatting with a friend of hers (hello Julia!) about card making and adhesive. From that convo, Rebecca thought a “Cardmaking 101” post, with some basic tips and tricks, would be a good thing. Please note that while I might mention brand names, these are personal preferences curated from close to 30 years of paper crafting and that neither Rebecca nor I gain any profit from any you might choose to purchase.
Let’s start with sizes. Most card makers make cards that are A2 sized – a 4 ¼ X 5 ½ inch finished size. This is also called “invitation size”. You get this size by slicing a regular 8.5 X 11 inch sheet of card stock in half either horizontally (to get an 8 ½ X 5 ½ inch piece) or vertically (to get a 4 ¼ X 11 inch piece) and folding the resulting piece in half. Envelopes for this size card are widely available on Amazon as well as in craft and big box stores.
Another popular card size is 5 X 7, which requires a base size of 10 X 7 inches, folded in half.
Speaking of folding, it’s always a great idea to score your paper before folding it. Scoring the paper makes an indentation where the fold will go, loosening the fibers of the paper so it will fold more neatly and doesn’t crack. While you might think that you should fold the indentation to the inside of the card, you should actually fold that to the outside, as it’s the part of the paper that has been stretched and will lie flatter. Many paper cutters come with a scoring blade (more on that later) or you can score your paper using a scoring board. You can also just use a ruler with a stylus, a bone folder or a dull butter knife.
What are you going to cut and score? Paper, of course! Or, more specifically, cardstock. A good sturdy card stock is what you need for a card base. If you are just starting out, white is the way to go. My personal favorite is Neenah Paper 4456 110lb Classic Crest Cardstock. This is a great, heavyweight stock that makes an impressive card that stands well on its own. It stands up well to any embellishment that you add to it and you can stamp and color on it with no bleed through. Other good options are the “heavyweight” Paper Studio paper at Hobby Lobby and Stampin’ Up’s Basic White.
As you expand your stash, black, cream and kraft also make great neutral card bases.
65lb paper is much lighter and a good option for adding layers to your card without adding additional weight. This is the weight of paper that usually comes in multicolor paper packs or paper pads. This is also a great weight for patterned paper to add interest to your cards.
You’re going to need something to cut this paper. A good paper cutter is a life saver in paper crafting. While you can use scissors, a paper cutter will ensure that you have clean, straight cuts and the built in measuring tools will make measuring your pieces so much easier. There are three basic kinds of paper cutters. A rotary trimmer has a round blade that slides along a rail. These provide a very clean and accurate cut. They are large and take a good amount of space to store. A guillotine cutter has an arm with a blade that is manually pulled down through a stack of paper. You can generally cut more paper at a time with a guillotine trimmer and the blade is self-sharpening, but your paper may shift, providing a less accurate cut. A bypass trimmer has a small blade that runs in a groove along a track. This type of trimmer also often comes with an additional non-cutting scoring blade that you can use to in the same track. The cutting blades tend to dull quickly and have to be changed often. These cutters are small and easy to store.
Most paper trimmers will come in a regular and mini size.
If you are going to buy just one, I recommend the Fiskars Precision Rotary 12 inch Trimmer. It’s a big boy, but it provides the best accuracy of any trimmer I’ve ever had and the blade will last a very very long time.
If space is an issue, I’ve been very satisfied with the Cricut Portable Trimmer. You will have to change the blade frequently, but it’s a good little cutter.
Adhesive holds it all together. You have two basic choices – wet or double sided adhesive. Both have their place, but not all are created equal. For wet glue, your Elmer’s school glue is just not going to cut it anymore. You need something with less wet, more tack and shorter drying time. You also need a light hand – less is definitely more. For liquid, Tombow Mono Multi Liquid Glue is the gold standard.
It’s inexpensive and a little goes a long way. Because it’s wet, you also have a few seconds of wiggle to straighten things out if they are not quite right.
For double sided adhesive, there are a couple of options. A tape runner is the most common. This type puts a line of double sided adhesive down on your paper so you can press it into place on your project. Small disposable ones like the Tombow Mono are a good option for a now and then paper crafter.
I like this bad boy – the Scotch ATG 714. It’s the same concept – just a larger, refillable roll, so there’s less waste and the roll lasts longer. The downside of double sided tape is that there is no wiggle room. Once that paper is down, it’s down, so you have to commit to placement.
To be honest, these are really the only ones you need for most card making. Unless you get into lots of different kinds of embellishment where specialty glues are needed, these two types will get the job done.
From there, it’s all embellishment. In part two, I’ll talk more about stamps & stamp pads and paper punches & die cutting.
Rebecca here! Let me know if you guys enjoy these more basic tutorials on some standard crafty methods!
Whatever you celebrate this holiday season, I hope you have a safe and relaxing holiday filled with love. Don't forget to check out the shop tab too for all sorts of amazing gifts! See you in 2021!
- Rebecca & Suzanne
Hello everyone! Happy December! So I'm going to make it clear right now, this blog is less of a tutorial and more of me walking you through a super labor-intensive DIY that I would only recommend if you are very brave and have a full day to spare. So my husband and I had collected a mismatched Christmas village. You know the little ones made of porcelain that you put lights in? We had some from family, some from the thrift store and some from who knows where and had a big set of not cohesive houses. I do love a Christmas village and got it in my head to make a simple, wooden village that more matched my style. My mother found these perfect little house shapes at the Dollar Tree and got 6 for me.
The first trial of this project was getting the felt flowers and leaves off of the houses. This was not easy. It was a two-person job that involved a heat gun and some scraping.
Once the leaves and flowers were scraped off, my lovely father cut these down for me. I wanted the houses to all look a bit different so he cut some to be shorter or squatter. Using the cutoffs, he was also able to cut me some little pieces that I was able to use as chimneys. I then sanded down all of the houses using a sander to make them easier for painting. Once the houses were prepped and ready, I picked the paper that I was going to use to decorate the houses. I went with 6 sheets of paper from the same farmhousey paper pad.
Once I picked the paper I was going to use for each house, I picked and mixed paint colors to match the paper. I painted the sides, back and a little bit of the front of the houses as I planned to cover most of the front of the houses with the paper.
I used some sandpaper to sand off some of the paint and give the houses a shabby chic look. If you want to make something look more worn and old, I would always recommend going at it with some sandpaper. I then traced the shape of the house out of paper with a knife. I cut the paper down slightly smaller than the house so that the painted edge showed. I also used some sandpaper to give the edge of the paper a worn look. Then using some Mod Podge, I glued the paper to the front of each house.
Once the Mod Podge was dry, I attached some chimneys (which I had also painted) using some Super Glue. Now was time for the more intensive and time-consuming decorating part of the project. I knew I wanted one of the house to have a fence so I used some wooden stirrers and chipboard that I cut down and painted white which I attached with Super Glue.
I also wanted a roof on two of the houses. I can't begin to express how long this took. Using the same wooden stirrers which I painted, cut and Super Glued, I created a shingle-style roof on one house. I did a similar approach on another house, but don't have pictures of that roof attempt as I went wrong the first time and I was real grumpy about it.
I also found some smaller wooden pieces in my mother's wood drawer and painted these for additional decoration. Once the houses were finished, I sprayed them with a few coats of sealer to protect them.
To finish off the Christmas village feeling, I found some cute Christmas trees and fake tiny lights at Hobby Lobby. I wrapped the lights around the trees to add to the scene.
And then they were done! These were VERY MUCH a labor of love, but they came out so cute and I love how the entire village looks as part of some Christmas decor. Please ignore the radiator intruding on this adorable Christmas scene.
What do you guys think? Do you like this simpler approach to a Christmas village or do you prefer the traditional style?
Also, don't forget to check out my Shop page where I currently have some paintings listed. I will be trying to add some more products there over the next few months so please take a look!
Whatever you all celebrate, I hope you have a happy holiday season!
I am a 24-year-old crafter and baker from New Hampshire!